PED Explorer
Information on how to use this page
Volume Calculator
Inside Diameter Of Vesssel   All dimensions in mm
Height Of Top Dished End   Enter zero if end Is flat 
Length Of Cylinder (Tan To Tan)   Enter zero for a sphere
Height Of Bottom Dished End   Enter zero if end is flat or conical

 
Optional Conical End
Cone Axial Length:    Enter zero if not applicable
Cone Small End Diameter   Enter zero if not applicable 

 
Additional Volume
Enter Any Additional Volume   Enter zero if not applicable

     Answer In Capacity box Below
 

 Note
 Pressure In Barg Excluding static head (1 Bar = 14.5 PSI)
 Volume in Litres (1000 Litres = 1 Cubic Metre = 35.3 Cubic Feet)
 Pipe Size In Metric Nominal Bore      Fluid Group 1 = Hazardous
 Enter Pressure and capacity and click appropriate chart button 1 to 9
 
    VESSELS STEAM
 GENERATORS 
PIPING
Contents Gas Liquid - Gas Liquid
Fluid Group 1 2 1 2 - 1 2 1 2
Chart

    Pressure:  bar.     Capacity:   1 to 5 Volume (Litres)
 6 to 9 Pipe Size (Metric Nominal Bore)


Inspection Modules Available and Requirements

Chart Selected:  Inspection Category:   
 

No Quality Assurance System

Quality Control System

[Home]  [Introduction]  [Categories]  [Modules]  [Standards]  [Materials]  [Safety]  [Q & A]
Page last updated 15 October 2012